Technical Specifications for our Movement Joints

Metals

Stainless Steel - Grade 304 (Grade 316 can be supplied on request) BS 1449 Part 2 1983.

Brass - CZ108BS 2870/5

Vamac Insert
Property	Test Method	Units	Properties
Hardness	BS 903 part A26	I.R.H.D.	95 +/- 5
Tensile strength	BS 903 part A2	Mpa	8 min
Elongation at break	BS 903 part A2	%	50 min
Specific Gravity	BS 903 part A1	G/cc	1.367 +/- 0.03
Abrasion	ISO 4649	Mm³	<250
Flammability	BS 476 Part 6	Class	0
Flammability	BS 476 Part 7	Class	1
Smoke Emission	BS 6853 App B5.4	Ao	<150
Temperature Index	BS 6853 App A	Deg	>350
Slip resistance	SATRA		Pass
Graffiti Resistance	RSE/STD013 part4		Good
Resistance to fluids	RSE/STD013 part4		Good
Oil resistance			Good
Toxic Fume	LUL Test Procedure		Pass
			Zero Halogen

Date: 08/05/2015 - Version: 1.01

Vamac® is a registered trademark of Dupont
In the interest of continual product improvement, all specifications are subject to change without prior notice

Flooring Movement Joints where expansion is required

Tileguard 1 Movement Joints Movement Joints Tileguard 1
Suitable for use with ceramic floor tiles, marble and terrazzo tiles when fixing in an adhesive bed.
Read About Movement Joints

Tileguard 2 Movement Joints Movement Joints Tileguard 2
Suitable for use with ceramic floor tiles, marble and terrazzo tiles when fixing in adhesive bed.
Movement Joints Tileguard 2

Tileguard 3 Movement Joints Movement Joints Tileguard 3
Suitable for use with ceramic floor tiles, marble and terrazzo tiles. Brass profile may be ground down.
Movement Joints Tileguard 3

Tileguard 4 Movement Joints Movement Joints Tileguard 4
Triplejoint (Foam tail), is suitable for use where deep joints are requested, the flexible bottom section is easily cut.
Movement Joints Tileguard 4

Metals

Vamac Insert